NX 7 - Extrude Command Options (Offset and Draft)

This NX 7 video tutorial shows a technique of using one sketch to create multiple features having different extrude offset and draft. The target of this tutorial is to create bosses with screw holes. This tutorial also shows the creation of electrical contacts in a cordless drill as an example to show, how to use the Offset options of the Extrude command.

Nx Beginners Tutorial - 1: User Interface and Menu Options

In this Nx video tutorial, NX User Interface and Menu Options are explain in detail. This is a good starting point for beginners who are first time learning NX. For this tutorial NX 4 is used.

Siemens Nx Tutorial: Automate Progressive Die Design

Siemens Nx Tutorial: Automate Progressive Die Design. This video shows how you can Automate the Progressive Die Design with NX.

NX CAM: Example of a NC program including subprogramming for a multiple part

Example of a NC program including sub-programming for a multiple part setup including on-machine probing, which writes measured values into external log files which are then passed to a quality system (CAQ). The complete NC programming task is done with NX CAM from Siemens and UserCycle, which is a NX addon tool for cycle programming. Also the machine simulation is running under ISV, the integrated simulation and verification module of NX. Only one station of the part family setup is programmed, the other 3 part programs are create automatically through the postprocessor. All probing operation are created as machine cycles. The NC program and the simulation are done for a DMC 60 U with Siemens 840D solutionline control.

Siemens Nx UG Tutorials for Beginners

Search This Blog